I am a Cub Leader (Cub Scouts) and wear a shirt weekly.
My youngest attends (10 weeks) and feeding in a shirt revels a little too much so i set about making my own feeding vest to go underneath
You will need 2 vests of same style, elastic, tape measure, scissors, pins and sewing machine.
First determine where the top section reaches under your bust. Mark with pins ensuring the vest is flat and smooth. You need to add 2 inches below that point then cut it. Set aside.
Measure the cut off piece to determine how much vest you just removed. Mine was 10.5 inches.
Add on 4 inches and measuring from hem off your second vest cut along. You will now have a top of a vest and the bottom separate. Don’t mix them up with discarded sections.
On both sections fold under 0.5 inch then another 0.5 so the raw cut edge is encased and pin in place.
Using a zigzag stitch you will be sewing on elastic to the front section of each part. You will be securing the hem and elastic at same time. I cut my elastic 3 inches shorter than width of top. You will need to pull gently as you sew. Don’t pull too much as you only want a gentle puckering.
On your back section repeat but continue the zig zag stitch without elastic around the back section, or you could use a long straight stitch to secure.
Place lower section inside upper and over lap at side seams by at least 1-2 inches. Pin and sew along existing seam to secure.
Work your way around the back (unelasticated section) and overlap by same amount you overlapped sides. Pin then zigzag stitch in place.
Your vest is now done and unlike a lot of feeding vest for under clothes you don’t have to reveal too much.
Easy access with minimal exposure.
Sewing the back down creates a smoother finish.
The extra 4 inches added to lower section ensures post partum tum says under wraps.
This was my first go and would like to make one from scratch in future. This project cost me approx. £5.50.